| Previous Close | 0.1150 |
| Open | 0.1100 |
| Bid | 0.1200 x 0 |
| Ask | 0.1300 x 0 |
| Day's Range | 0.1100 - 0.1250 |
| 52 Week Range | 0.0950 - 0.2700 |
| Volume | 24,948 |
| Avg. Volume | 42,438 |
| Market Cap | 9.229M |
| Beta (5Y Monthly) | 1.05 |
| PE Ratio (TTM) | N/A |
| EPS (TTM) | -0.0160 |
| Earnings Date | N/A |
| Forward Dividend & Yield | N/A (N/A) |
| Ex-Dividend Date | N/A |
| 1y Target Est | N/A |
- GlobeNewswire
Azucar Hits 43.55 metres of 0.37 g/t Gold and 0.21% Copper at the Porvenir Zone at the El Cobre Project, Mexico
El Cobre Project Exploration Targets El Cobre Project Drill Plan Drill Plan Map Suegro and Porvenir El Cobre Project Porvenir Section EC-20-110 El Cobre Project Section Section EC-20-11 VANCOUVER, British Columbia, March 18, 2021 (GLOBE NEWSWIRE) -- Azucar Minerals Ltd. ("Azucar" or the "Company") (TSX-V: AMZ; OTCQX: AXDDF) is pleased to announce results from drilling at the Porvenir Zone at the El Cobre porphyry copper-gold project in Veracruz State, Mexico. The now complete additional drilling carried out at Porvenir helps define the geologic boundaries and distribution of copper and gold in this zone for geologic modelling. A plan showing the location of the Porvenir Zone updated with the new results is attached to this news release. The El Cobre project covers a large area of porphyry style alteration with numerous zones of copper-gold mineralisation identified by past work. Highlights of the new drilling in the Porvenir Zone include the following intervals: Hole EC-20-110 EL PORVENIR ZONE, 130 Az, -45 dipFrom 34.00 to 42.00, 8.00 metres @ 0.13 g/t gold and 0.18% copperFrom 171.00 to 175.00, 4.00 metres @ 0.26 g/t gold and 0.05% copperFrom 198.30 to 202.00, 3.70 metres @ 0.11 g/t gold and 0.21% copperFrom 248.00 to 325.65, 77.65 metres @ 0.26 g/t gold and 0.16% copper Including from 280.00 to 323.55, 43.55 metres @ 0.37 g/t gold and 0.21% copper Including from 298.00 to 323.55, 25.55 metres @ 0.45 g/t gold and 0.23% copperFrom 353.00 to 364.90, 11.90 metres @ 0.11 g/t gold and 0.10% copperFrom 375.90 to 415.00, 39.10 metres @ 0.14 g/t gold and 0.12% copperFrom 441.00 to 455.00, 14.00 metres @ 0.11 g/t gold and 0.12% copperFrom 526.00 to 529.00, 3.00 metres @ 0.45 g/t gold and 0.70% copperFrom 577.00 to 625.00, 48.00 metres @ 0.15 g/t gold and 0.09% copper Hole EC-21-111 EL PORVENIR ZONE, 310 Az, -40 dipFrom 115.00 to 131.70, 16.70 metres @ 0.10 g/t gold and 0.09% copperFrom 189.00 to 191.00, 2.00 metres @ 0.32 g/t gold and 0.15% copperFrom 351.00 to 388.00, 37.00 metres @ 0.12 g/t gold and 0.08% copper On September 29, 2020, the Company released an initial mineral resource estimate for the Norte Zone, located approximately 3 kilometres from Porvenir, comprising an indicated resource containing 748,000 ounces of gold and 221Mlbs copper (47.2 million tonnes grading 0.49 g/t Au, 0.21% Cu 1.4 g/t Ag) and an inferred resource containing 860,000 ounces of gold and 254Mlbs copper (64.2 million tonnes grading 0.42 g/t Au, 0.18% Cu and 1.3 g/t Ag). Looking forward, and subject to program results, the Company intends to continue exploration at the Suegro, Porvenir, and Villa Rica targets in an effort to further delineate resource potential at the project beyond that contained in the initial Norte Zone resource estimate. Azucar is reviewing the results of exploration to date in preparation for further drilling in 2021. Once these plans are defined the Company will provide an update, discussing these future activities. All work is being conducted in strict compliance with health and safety regulations, and with a constant focus on protecting the health and safety of employees and protecting and supporting local communities. J. Duane Poliquin, Chairman of Azucar, stated “We are pleased to report these further results from the Porvenir Zone and to getting the drill turning once again on the excellent targets that we have at El Cobre. We look forward to updating shareholders on this year’s plans and reporting on our progress and results.” About the El Cobre Project To date, Azucar has discovered five copper-gold porphyry zones within the El Cobre Project along an approximately 5km trend, stretching from Norte down to Encinal in the southeast (Figure 1). These zones are defined by distinct Cu-Au soil anomalies, discrete, positive magnetic features, a large IP chargeability anomaly, and drilling. A summary of the various zones is provided below. NORTE ZONE: All five holes drilled in the Norte Zone prior to 2016 intersected porphyry-style mineralisation. Hole 08-CBCN-022, one of the deepest holes drilled at Norte in 2008, returned values of 0.14% Cu with 0.19 g/t Au over 259 m and 08-CBCN-19 intersected 41.15 metres averaging 0.42 g/t gold and 0.27% copper to the end of the hole at 187.45 metres. Drilling at the Norte Zone in 2016 and 2017 resulted in intersections including 114.60 metres grading 1.33 g/t Au and 0.48% Cu (Hole EC-17-018, see press release of April 5, 2017), 80.50 metres grading 1.34 g/t Au and 0.46% Cu (Hole EC-16-012, see press release of October 24, 2016), and 70.45 metres grading 2.32 g/t Au and 0.59% Cu (Hole EC-17-026, see press release of July 25, 2017). Continued drilling through 2018 and 2019 has culminated in the mineral resource estimate announced on September 29, 2020. VILLA RICA ZONE: The Villa Rica Zone is located about 1.8 km south of the Norte zone, and comprises a roughly 2.5 kilometre by 1 kilometre area of hydrothermal alteration defined also by a strong north-northwest trending magnetic-chargeability high and associated copper-gold soil geochemical anomalies. Past mapping and sampling defined several areas of exposed porphyry mineralisation within the Villa Rica zone, including the Raya Tembrillo target and the Naranjo target, both at the north end of the Villa Rica zone. Initial drilling in 2017 on the Raya Tembrillo target intersected two styles of mineralisation; hypogene copper-gold porphyry mineralisation (115.00 metres of 0.57 g/t gold and 0.27% copper, see press release of November 28, 2017) and near surface exotic enriched copper mineralisation with an apparent tabular distribution (94.00 metres of 1.36% copper; see press release of December 13, 2017). The Primo target area, first announced on October 16, 2019, is also considered to be part of the Villa Rica zone, and is located approximately 1km south of Raya Tembrillo. Primo has been the location of some of the highest copper grades intersected at the Project, such as 200 metres of 0.40 g/t gold and 0.24% copper from 718 metres downhole, which included 86.50 metres of 0.70 g/t gold and 0.42% copper from 831.50 metres (see press release of October 16, 2019). EL PORVENIR ZONE: The El Porvenir zone is located about 2 km east of the Villa Rica zone. Significant copper and gold grades have been intersected at El Porvenir, such as 0.16% Cu and 0.39 g/t Au over 290 m in hole DDH04CB1. Results from minimal drilling in 2017 include hole EC-17-040 which intersected 108.00 metres grading 0.88 g/t Au and 0.29% Cu, and hole EC-17-044 which intersected 40.25 metres grading 0.50 g/t Au and 0.25% Cu. SUEGRO ZONE: Drilling in 2019 identified this new porphyry centre between the El Porvenir and Encinal Zones. The Suegro Zone is located approximately 250 metres southwest of the Porvenir Zone, within a large area of alteration associated with more subdued magnetics, and low zinc and manganese in soil. The Suegro mineralisation intersected in the drilling to date is associated with an altered (locally intense phyllic alteration overprinting potassic) intrusive. Intercepts to date include 28.20 m of 0.54 g/t Au and 0.17% Cu (hole EC-19-064; see press release of March 19, 2019). ENCINAL ZONE: The Encinal zone is located approximately 1km south of the El Porvenir zone. Previous drilling at Encinal has intersected a highly altered breccia pipe containing fragments of stockwork veining and porphyry mineralisation across which 18.28 metres returned 1.42 g/t Au and 0.10% Cu (Hole CB5). The breccia pipe occurs in a large alteration zone, IP chargeability high and magnetics low which has not been tested to depth. On June 19, 2017 Azucar announced that a new area of exposed stockwork quartz veining and gold mineralisation had been identified in the Encinal Zone. On June 29, 2017 Azucar announced the results of initial drilling on this exposed stockwork (Hole EC-17-025) which returned results including 34.47 metres grading 0.73 g/t Au and 0.20% Cu. More information on El Cobre is available on the Azucar website at http://www.azucarminerals.com. El Cobre NI 43-101 Technical Report On September 29, 2020, the Company released an initial mineral resource estimate for the Norte Zone comprising an indicated resource containing 748,000 ounces of gold and 221Mlbs copper (47.2 million tonnes grading 0.49 g/t Au, 0.21% Cu 1.4 g/t Ag) and an inferred resource containing 860,000 ounces of gold and 254Mlbs copper (64.2 million tonnes grading 0.42 g/t Au, 0.18% Cu and 1.3 g/t Ag). A related technical report prepared in accordance with National Instrument 43-101 and titled “NI 43-101 Technical Report Mineral Resource Estimate on the El Cobre Copper-Gold-Silver Property Veracruz State, Mexico” was filed under the Company’s profile on SEDAR on November 16, 2020 and can be obtained from www.sedar.com. Mr. Luis Alfonso Soto, B.Sc. Geology and a Certified Professional Geologist (AIPG, CPG-11938) is a Qualified Person as defined by National Instrument 43-101 ("NI 43-101") and has reviewed and approved the contents of this news release. The porphyry mineralisation reported in this news release is associated with broad areas of alteration and stockwork veining. True widths cannot be determined at this time. The analyses reported were carried out at ALS Global Laboratories of North Vancouver using industry standard analytical techniques. For gold, samples are first analysed by fire assay and atomic absorption spectroscopy (“AAS”). Samples that return values greater than 10 g/t gold using this technique are then re-analysed by fire assay but with a gravimetric finish. For copper, samples are first analysed by Inductively Coupled Plasma – Atomic Emission Spectroscopy (“ICP-AES”), with four acid digestion. Samples that return values greater than 10000 g/t copper using this technique are then re-analysed by HF-HNO3-HCLO4 digestion with HCL leach and ICP-AES finish. Blanks, field duplicates and certified standards were inserted into the sample stream as part of Azucar’s quality assurance and control program which complies with National Instrument 43-101 requirements. About Azucar Azucar is an exploration company with a mandate to thoroughly explore the El Cobre project in Veracruz, Mexico, which covers multiple gold-rich porphyry targets, as demonstrated by recent drilling. Azucar holds a 100% interest in the El Cobre project, subject to net smelter returns (“NSR”) royalty interests, assuming production from the property exceeds 10,001 tonnes per day of ore, totaling 2.25% which can be reduced to 2.0% though the payment of US$3.0 million. On behalf of the Board of Directors, “J. Duane Poliquin”J. Duane Poliquin, P.Eng.ChairmanAzucar Minerals Ltd. Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. This news release includes forward-looking statements that are subject to risks and uncertainties. All statements within it, other than statements of historical fact, are to be considered forward looking. Although the Company believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results or developments may differ materially from those in forward-looking statements. Factors that could cause actual results to differ materially from those in forward-looking statements include market prices, exploitation and exploration successes, continued availability of capital and financing, and general economic, market or business conditions. There can be no assurances that such statements will prove accurate and, therefore, readers are advised to rely on their own evaluation of such uncertainties. We do not assume any obligation to update any forward-looking statements, other than as required pursuant to applicable securities laws. Contact Information: Azucar Minerals Ltd.Tel. 604.689.7644Email: info@azucarminerals.comhttp://www.azucarminerals.com/ Photos accompanying this announcement are available at:https://www.globenewswire.com/NewsRoom/AttachmentNg/6850abda-44f9-4bb1-b47e-5c81ee725a9ahttps://www.globenewswire.com/NewsRoom/AttachmentNg/964c32a7-fbca-43bf-96e8-d747881a25a3https://www.globenewswire.com/NewsRoom/AttachmentNg/e99d82db-35ac-45e3-88b5-5f16e14e3c30https://www.globenewswire.com/NewsRoom/AttachmentNg/ed249ebb-c25e-4c5b-a153-7e4bc5a1437f
- GlobeNewswire
Azucar hits 65.50 metres of 0.39 g/t Au and 0.22% Cu at the Porvenir Zone, El Cobre Project, Mexico
El Cobre Property Exploration Targets Porvenir Target, El Cobre Property Drill Plan Map Porvenir Target, El Cobre Property Drill Section VANCOUVER, British Columbia, Feb. 04, 2021 (GLOBE NEWSWIRE) -- Azucar Minerals Ltd. ("Azucar" or the "Company") (TSX-V: AMZ; OTCQX: AXDDF) is pleased to provide an update from drilling conducted at the Porvenir Zone of the El Cobre porphyry copper-gold project in Veracruz State, Mexico. Past drilling at the Porvenir Zone has demonstrated porphyry copper-gold mineralisation beneath the surface exposure of the mineralized zone. The current drilling has been designed to better understand the distribution and extent of this mineralisation. Drilling planned for the Porvenir Zone has been completed and future drilling on the project will be planned based on a geologic review currently underway and the receipt of outstanding assay results. In the meantime a surface field work program is planned to better define several targets prior to drill testing. A plan diagram for the drilling results reported today is provided with this news release and highlights include the following intervals: Hole EC-20-109 Porvenir Target, 030 Az, -68 dipFrom 54.50 to 329.82.32m, 275.32 metres @ 0.26 g/t gold and 0.14% copper Including 216.50 to 282.00.32m, 65.50 metres @ 0.39 g/t gold and 0.22% copper Includes 220.50 to 230.50m, 10.00 metres @ 0.54 g/t gold and 0.29% copper And 242.50 to 268.00m, 25.50 metres @ 0.52 g/t gold and 0.30% copper J. Duane Poliquin, Chairman of Azucar commented, “With the announcement of the initial resource at the Norte target in September last year, our exploration focus is now two-fold; to better understand other near surface zones of mineralisation, such as Porvenir, and to continue our search for additional porphyry centres at the project.” About the El Cobre Project To date, Azucar has discovered five copper-gold porphyry zones within the El Cobre Project along an approximately 5km trend, stretching from Norte down to Encinal in the southeast (Figure 1). These zones are defined by distinct Cu-Au soil anomalies, discrete, positive magnetic features, a large IP chargeability anomaly, and drilling. A summary of the various zones is provided below. NORTE ZONE: All five holes drilled in the Norte Zone prior to 2016 intersected porphyry-style mineralisation. Hole 08-CBCN-022, one of the deepest holes drilled at Norte in 2008, returned values of 0.14% Cu with 0.19 g/t Au over 259 m and 08-CBCN-19 intersected 41.15 metres averaging 0.42 g/t gold and 0.27% copper to the end of the hole at 187.45 metres. Drilling at the Norte Zone in 2016 and 2017 resulted in intersections including 114.60 metres grading 1.33 g/t Au and 0.48% Cu (Hole EC-17-018, see press release of April 5, 2017), 80.50 metres grading 1.34 g/t Au and 0.46% Cu (Hole EC-16-012, see press release of October 24, 2016), and 70.45 metres grading 2.32 g/t Au and 0.59% Cu (Hole EC-17-026, see press release of July 25, 2017). Continued drilling through 2018 and 2019 has culminated in the mineral resource estimate announced on September 29, 2020. VILLA RICA ZONE: The Villa Rica Zone is located about 1.8 km south of the Norte zone, and comprises a roughly 2.5 kilometre by 1 kilometre area of hydrothermal alteration defined also by a strong north-northwest trending magnetic-chargeability high and associated copper-gold soil geochemical anomalies. Past mapping and sampling defined several areas of exposed porphyry mineralisation within the Villa Rica zone, including the Raya Tembrillo target and the Naranjo target, both at the north end of the Villa Rica zone. Initial drilling in 2017 on the Raya Tembrillo target intersected two styles of mineralisation; hypogene copper-gold porphyry mineralisation (115.00 metres of 0.57 g/t gold and 0.27% copper, see press release of November 28, 2017) and near surface exotic enriched copper mineralisation with an apparent tabular distribution (94.00 metres of 1.36% copper; see press release of December 13, 2017).The Primo target area, first announced on October 16, 2019, is also considered to be part of the Villa Rica zone, and is located approximately 1km south of Raya Tembrillo. Primo has been the location of some of the highest copper grades intersected at the Project, such as 200 metres of 0.40 g/t gold and 0.24% copper from 718 metres downhole, which included 86.50 metres of 0.70 g/t gold and 0.42% copper from 831.50 metres (see press release of October 16, 2019). EL PORVENIR ZONE: The El Porvenir zone is located about 2 km east of the Villa Rica zone. Significant copper and gold grades have been intersected at El Porvenir, such as 0.16% Cu and 0.39 g/t Au over 290 m in hole DDH04CB1. Results from minimal drilling in 2017 include hole EC-17-040 which intersected 108.00 metres grading 0.88 g/t Au and 0.29% Cu, and hole EC-17-044 which intersected 40.25 metres grading 0.50 g/t Au and 0.25% Cu. SUEGRO ZONE: Drilling in 2019 identified this new porphyry centre between the El Porvenir and Encinal Zones. The Suegro Zone is located approximately 250 metres southwest of the Porvenir Zone, within a large area of alteration associated with more subdued magnetics, and low zinc and manganese in soil. The Suegro mineralisation intersected in the drilling to date is associated with an altered (locally intense phyllic alteration overprinting potassic) intrusive. Intercepts to date include 28.20 m of 0.54 g/t Au and 0.17% Cu (hole EC-19-064; see press release of March 19, 2019). ENCINAL ZONE: The Encinal zone is located approximately 1km south of the El Porvenir zone. Previous drilling at Encinal has intersected a highly altered breccia pipe containing fragments of stockwork veining and porphyry mineralisation across which 18.28 metres returned 1.42 g/t Au and 0.10% Cu (Hole CB5). The breccia pipe occurs in a large alteration zone, IP chargeability high and magnetics low which has not been tested to depth. On June 19, 2017 Azucar announced that a new area of exposed stockwork quartz veining and gold mineralisation had been identified in the Encinal Zone. On June 29, 2017 Azucar announced the results of initial drilling on this exposed stockwork (Hole EC-17-025) which returned results including 34.47 metres grading 0.73 g/t Au and 0.20% Cu. More information on El Cobre is available on the Azucar website at http://www.azucarminerals.com. El Cobre NI 43-101 Technical Report On September 29, 2020, the Company released an initial mineral resource estimate for the Norte Zone comprising an indicated resource containing 748,000 ounces of gold and 221Mlbs copper (47.2 million tonnes grading 0.49 g/t Au, 0.21% Cu 1.4 g/t Ag) and an inferred resource containing 860,000 ounces of gold and 254Mlbs copper (64.2 million tonnes grading 0.42 g/t Au, 0.18% Cu and 1.3 g/t Ag). A related technical report prepared in accordance with National Instrument 43-101 and titled “NI 43-101 Technical Report Mineral Resource Estimate on the El Cobre Copper-Gold-Silver Property Veracruz State, Mexico was filed under the Company’s profile on SEDAR on November 16, 2020 and can be obtained from www.sedar.com. Mr. Luis Alfonso Soto, B.Sc. Geology and a Certified Professional Geologist (AIPG, CPG-11938) is a Qualified Person as defined by National Instrument 43-101 ("NI 43-101") and has reviewed and approved the contents of this news release. The porphyry mineralisation reported in this news release is associated with broad areas of alteration and stockwork veining. True widths cannot be determined at this time. The analyses reported were carried out at ALS Global Laboratories of North Vancouver using industry standard analytical techniques. For gold, samples are first analysed by fire assay and atomic absorption spectroscopy (“AAS”). Samples that return values greater than 10 g/t gold using this technique are then re-analysed by fire assay but with a gravimetric finish. For copper, samples are first analysed by Inductively Coupled Plasma – Atomic Emission Spectroscopy (“ICP-AES”), with four acid digestion. Samples that return values greater than 10000 g/t copper using this technique are then re-analysed by HF-HNO3-HCLO4 digestion with HCL leach and ICP-AES finish. Blanks, field duplicates and certified standards were inserted into the sample stream as part of Azucar’s quality assurance and control program which complies with National Instrument 43-101 requirements. About Azucar Azucar is an exploration company with a mandate to thoroughly explore the El Cobre project in Veracruz, Mexico, which covers multiple gold-rich porphyry targets, as demonstrated by recent drilling. Azucar holds a 100% interest in the El Cobre project, subject to net smelter returns (“NSR”) royalty interests, assuming production from the property exceeds 10,001 tonnes per day of ore, totaling 2.25% which can be reduced to 2.0% though the payment of US$3.0 million. On behalf of the Board of Directors, “J. Duane Poliquin”J. Duane Poliquin, P.Eng.ChairmanAzucar Minerals Ltd. Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. This news release includes forward-looking statements that are subject to risks and uncertainties. All statements within it, other than statements of historical fact, are to be considered forward looking. Although the Company believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results or developments may differ materially from those in forward-looking statements. Factors that could cause actual results to differ materially from those in forward-looking statements include market prices, exploitation and exploration successes, continued availability of capital and financing, and general economic, market or business conditions. There can be no assurances that such statements will prove accurate and, therefore, readers are advised to rely on their own evaluation of such uncertainties. We do not assume any obligation to update any forward-looking statements, other than as required pursuant to applicable securities laws. Contact Information: Azucar Minerals Ltd.Tel. 604.689.7644Email: info@azucarminerals.comhttp://www.azucarminerals.com/ Photos accompanying this announcement are available at:https://www.globenewswire.com/NewsRoom/AttachmentNg/3bfc4ee4-b67b-472c-bce6-96277e1f5064 https://www.globenewswire.com/NewsRoom/AttachmentNg/4382a63d-f8d9-4fe2-9fe0-1e0a9bb29516 https://www.globenewswire.com/NewsRoom/AttachmentNg/1fbdff23-20a1-499b-a50e-cd44bee9d307
- GlobeNewswire
Azucar Updates on Drilling Activity at the El Cobre Project, Mexico
El Cobre Property Exploration Targets El Cobre Property Primo Target Drill Plan map VANCOUVER, British Columbia, Jan. 28, 2021 (GLOBE NEWSWIRE) -- Azucar Minerals Ltd. (“Azucar” or the “Company”) (TSX-V: AMZ; OTCQX: AXDDF) is pleased to announce that crews have returned from the holiday break and the Company has resumed drilling with one diamond drill at the El Cobre porphyry copper-gold project in Veracruz State, Mexico. Further to the Company’s press release of November 12, 2020, Azucar completed hole EC-20-108 in December 2020, located in the Primo Zone (see Figure 1, Exploration Targets). The deeper part of this hole intersected mostly propylitically altered intrusive rocks. Further drilling is required in the Primo zone to fully test for the high grade mineralisation which was identified initially in this area in hole EC-19-086 (see Figure 2, Primo Target). The Primo target is a new discovery initially announced in 2019 (see Azucar news release of October 16th, 2019) based on the intersection in hole EC-19-086 of (from 718.00 to 918.00) 200.00 metres returning 0.40 g/t gold and 0.24% copper, including 86.50 metres of 0.70 g/t gold and 0.42% copper which included 55.60 metres of 0.94 g/t gold and 0.56% copper. Azucar has moved the drill to the Porvenir Zone and has now completed two holes there and started a third. Looking forward, and subject to program results, the Company intends to continue exploration at the Primo, Porvenir, and Villa Rica targets in an effort to further delineate resource potential at the project beyond that contained in the initial Norte Zone resource estimate announced on September 29, 2020. All work is being conducted in strict compliance with health and safety regulations, and with a constant focus on protecting the health and safety of employees and protecting and supporting local communities. J. Duane Poliquin, Chairman of Azucar, stated, “We are pleased to have the drill turning once again on the excellent targets that we have at El Cobre. We look forward to updating shareholders on progress later this winter.” About the El Cobre Project To date, Azucar has discovered five copper-gold porphyry zones within the El Cobre Project along an approximately 5km trend, stretching from Norte down to Encinal in the southeast (Figure 1). These zones are defined by distinct Cu-Au soil anomalies, discrete, positive magnetic features, a large IP chargeability anomaly, and drilling. A summary of the various zones is provided below. NORTE ZONE: All five holes drilled in the Norte Zone prior to 2016 intersected porphyry-style mineralisation. Hole 08-CBCN-022, one of the deepest holes drilled at Norte in 2008, returned values of 0.14% Cu with 0.19 g/t Au over 259 m and 08-CBCN-19 intersected 41.15 metres averaging 0.42 g/t gold and 0.27% copper to the end of the hole at 187.45 metres. Drilling at the Norte Zone in 2016 and 2017 resulted in intersections including 114.60 metres grading 1.33 g/t Au and 0.48% Cu (Hole EC-17-018, see press release of April 5, 2017), 80.50 metres grading 1.34 g/t Au and 0.46% Cu (Hole EC-16-012, see press release of October 24, 2016), and 70.45 metres grading 2.32 g/t Au and 0.59% Cu (Hole EC-17-026, see press release of July 25, 2017). Continued drilling through 2018 and 2019 has culminated in the mineral resource estimate announced on September 29, 2020. VILLA RICA ZONE: The Villa Rica Zone is located about 1.8 km south of the Norte zone, and comprises a roughly 2.5 kilometre by 1 kilometre area of hydrothermal alteration defined also by a strong north-northwest trending magnetic-chargeability high and associated copper-gold soil geochemical anomalies. Past mapping and sampling defined several areas of exposed porphyry mineralisation within the Villa Rica zone, including the Raya Tembrillo target and the Naranjo target, both at the north end of the Villa Rica zone. Initial drilling in 2017 on the Raya Tembrillo target intersected two styles of mineralisation; hypogene copper-gold porphyry mineralisation (115.00 metres of 0.57 g/t gold and 0.27% copper, see press release of November 28, 2017) and near surface exotic enriched copper mineralisation with an apparent tabular distribution (94.00 metres of 1.36% copper; see press release of December 13, 2017). The Primo target area, first announced on October 16, 2019, is also considered to be part of the Villa Rica zone, and is located approximately 1km south of Raya Tembrillo. Primo has been the location of some of the highest copper grades intersected at the Project, such as 200 metres of 0.40 g/t gold and 0.24% copper from 718 metres downhole, which included 86.50 metres of 0.70 g/t gold and 0.42% copper from 831.50 metres (see press release of October 16, 2019). EL PORVENIR ZONE: The El Porvenir zone is located about 2 km east of the Villa Rica zone. Significant copper and gold grades have been intersected at El Porvenir, such as 0.16% Cu and 0.39 g/t Au over 290 m in hole DDH04CB1. Results from minimal drilling in 2017 include hole EC-17-040 which intersected 108.00 metres grading 0.88 g/t Au and 0.29% Cu, and hole EC-17-044 which intersected 40.25 metres grading 0.50 g/t Au and 0.25% Cu. SUEGRO ZONE: Drilling in 2019 identified this new porphyry centre between the El Porvenir and Encinal Zones. The Suegro Zone is located approximately 250 metres southwest of the Porvenir Zone, within a large area of alteration associated with more subdued magnetics, and low zinc and manganese in soil. The Suegro mineralisation intersected in the drilling to date is associated with an altered (locally intense phyllic alteration overprinting potassic) intrusive. Intercepts to date include 28.20 m of 0.54 g/t Au and 0.17% Cu (hole EC-19-064; see press release of March 19, 2019). ENCINAL ZONE: The Encinal zone is located approximately 1km south of the El Porvenir zone. Previous drilling at Encinal has intersected a highly altered breccia pipe containing fragments of stockwork veining and porphyry mineralisation across which 18.28 metres returned 1.42 g/t Au and 0.10% Cu (Hole CB5). The breccia pipe occurs in a large alteration zone, IP chargeability high and magnetics low which has not been tested to depth. On June 19, 2017 Azucar announced that a new area of exposed stockwork quartz veining and gold mineralisation had been identified in the Encinal Zone. On June 29, 2017 Azucar announced the results of initial drilling on this exposed stockwork (Hole EC-17-025) which returned results including 34.47 metres grading 0.73 g/t Au and 0.20% Cu. More information on El Cobre is available on the Azucar website at http://www.azucarminerals.com. El Cobre NI 43-101 Technical Report On September 29, 2020, the Company released an initial mineral resource estimate for the Norte Zone comprising an indicated resource containing 748,000 ounces of gold and 221Mlbs copper (47.2 million tonnes grading 0.49 g/t Au, 0.21% Cu 1.4 g/t Ag) and an inferred resource containing 860,000 ounces of gold and 254Mlbs copper (64.2 million tonnes grading 0.42 g/t Au, 0.18% Cu and 1.3 g/t Ag). A related technical report prepared in accordance with National Instrument 43-101 and titled “NI 43-101 Technical Report Mineral Resource Estimate on the El Cobre Copper-Gold-Silver Property Veracruz State, Mexico was filed under the Company’s profile on SEDAR on November 16, 2020 and can be obtained from www.sedar.com. Mr. Luis Alfonso Soto, B.Sc. Geology and a Certified Professional Geologist (AIPG, CPG-11938) is a Qualified Person as defined by National Instrument 43-101 ("NI 43-101") and has reviewed and approved the contents of this news release. The porphyry mineralisation reported in this news release is associated with broad areas of alteration and stockwork veining. True widths cannot be determined at this time. The analyses reported were carried out at ALS Global Laboratories of North Vancouver using industry standard analytical techniques. For gold, samples are first analysed by fire assay and atomic absorption spectroscopy (“AAS”). Samples that return values greater than 10 g/t gold using this technique are then re-analysed by fire assay but with a gravimetric finish. For copper, samples are first analysed by Inductively Coupled Plasma – Atomic Emission Spectroscopy (“ICP-AES”), with four acid digestion. Samples that return values greater than 10000 g/t copper using this technique are then re-analysed by HF-HNO3-HCLO4 digestion with HCL leach and ICP-AES finish. Blanks, field duplicates and certified standards were inserted into the sample stream as part of Azucar’s quality assurance and control program which complies with National Instrument 43-101 requirements. About Azucar Azucar is an exploration company with a mandate to thoroughly explore the El Cobre project in Veracruz, Mexico, which covers multiple gold-rich porphyry targets, as demonstrated by recent drilling. Azucar holds a 100% interest in the El Cobre project, subject to net smelter returns (“NSR”) royalty interests, assuming production from the property exceeds 10,001 tonnes per day of ore, totaling 2.25% which can be reduced to 2.0% though the payment of US$3.0 million. On behalf of the Board of Directors, “J. Duane Poliquin” J. Duane Poliquin, P.Eng. Chairman Azucar Minerals Ltd. Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. This news release includes forward-looking statements that are subject to risks and uncertainties. All statements within it, other than statements of historical fact, are to be considered forward looking. Although the Company believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results or developments may differ materially from those in forward-looking statements. Factors that could cause actual results to differ materially from those in forward-looking statements include market prices, exploitation and exploration successes, continued availability of capital and financing, and general economic, market or business conditions. There can be no assurances that such statements will prove accurate and, therefore, readers are advised to rely on their own evaluation of such uncertainties. We do not assume any obligation to update any forward-looking statements, other than as required pursuant to applicable securities laws. Contact Information: Azucar Minerals Ltd.Tel. 604.689.7644Email: info@azucarminerals.comhttp://www.azucarminerals.com/ Photos accompanying this announcement are available at: https://www.globenewswire.com/NewsRoom/AttachmentNg/db4651a8-b415-4c46-8166-b905a9578e9c https://www.globenewswire.com/NewsRoom/AttachmentNg/b56a4224-3752-4df2-b73e-cfe10d72a461
