Yahoo Finance Pasofino Gold Announces Results for a Further 12 Holes at Tuzon Deposit on the Dugbe Gold Project
Toronto, Ontario--(Newsfile Corp. - September 8, 2021) - Pasofino Gold Limited (TSXV: VEIN) (OTCQB: EFRGF) (FSE: N07A) ("Pasofino" or the "Company") is pleased to announce that it has received results from a further 12 holes drilled at the Tuzon deposit on the Dugbe Gold Project, in which the Company has an option to earn a 49% economic interest (prior to the issuance of the Government of Liberia's 10% carried interest).
Highlights
11 of the 12 holes contain gold mineralised intervals. Results for all 12 holes are provided in table 1.
10 intersections at +2 g/t gold, which is encouraging for the update to the Mineral Resource Estimate (MRE) that is expected in early October, 2021.
Three holes have 100 to 200 gram-metres of gold within multiple stacked intervals, starting at or near surface.
Based on the new results, opportunities for further expansion are apparent.
Intersections include the below:
TDC176_GT has 3 mineralised intervals including:
30.1m @ 1.94 g/t from 53.4 m downhole, within which is 4.5 m grading 3.56g/t Au.
TDC177 has 3 intervals:
32.0m @ 0.58 g/t from surface.
77.0m @ 0.95 g/t from 174m downhole, within which is 27.8 m @ 2.33 g/t.
71.0m @ 1.50 g/t from 318 m downhole, within which is 18.1 m @ 2.31 g/t.
TDC190 has 5 mineralised intervals including:
12.5m @ 1.19 g/t from 99.0m downhole.
15.5m @ 0.70 g/t from 149.5 m downhole.
54.5m @ 1.38 g/t from 194.5m downhole.
TDC182 at the northern limit of the deposit intersected very shallow mineralisation:
41.9m @ 1.08 g/t from 4.0m downhole, within which is 7.0 m @ 2.42 g/t Au.
Trenching on the 6 km gold-in-soil trend extending southwest on strike from Tuzon is nearing completion. The first batch of 350 samples is at the lab. The trenches are adding to the initial 3 on this trend reported in May[1] which included 36 m @ 0.6 g/t.
Ian Stalker, CEO, commented;
"These intersections continue to demonstrate the scale of the Tuzon deposit and the common occurrence of 100 to 200 gram-metre holes, and that it remains open for further expansion. We look forward to completing the updated Mineral Resource Estimate for Tuzon and the nearby Dugbe F deposit within the coming weeks."
Table 1. All intersections (not highlights) in numerical order, for the latest 12 drillholes at Tuzon. Those shown in grey-italic font for TDC031, TDC081 and TDC086 are for the upper part of the hole drilled between 2011 and 2014, recently extended by up to 250 m. Those ending _GT are holes that were drilled partially for geotechnical purposes.
Note: Some intersections may not reflect the true thickness of the mineralized layer.
BHID | From (m) | To (m) | Intersection g/t Au |
TDC031 | 125.0 | 139.0 | 14.0m @ 1.30 g/t |
179.0 | 213.0 | 34.0 @ 1.22 g/t | |
416.0 | 425.0 | 9.0m @1.23 g/t | |
TDC081 | 0.0 | 18.8 | 18.8m @ 1.78 g/t |
358.5 | 363.0 | 4.5m @ 0.58 g/t | |
TDC086 | 52 | 56 | 4.0m @ 2.18 g/t |
72 | 141.6 | 69.6m @ 1.30 g/t | |
including 9.0 m grading 3.6 g/t Au from 128.0 m downhole | |||
196.9 | 206.2 | 9.3m @ 1.42 g/t | |
368.30 | 419.50 | 51.2m @ 1.08 g/t | |
including 3.0 m grading 3.00 g/t Au from 388.5 m downhole | |||
TDC176_GT | 53.4 | 83.5 | 30.1m @ 1.94 g/t |
including 4.5 m grading 3.56g/t Au from 61.0 m downhole | |||
133.0 | 156.6 | 23.6m @ 1.01 g/t | |
256.0 | 260.0 | 4.0m @ 1.67 g/t | |
TDC177 | 0.0 | 32.0 | 32.0m @ 0.58 g/t |
174.0 | 251.0 | 77.0m @ 0.95 g/t | |
including 27.8 m grading 2.33 g/t Au from 206.7 m downhole | |||
318.0 | 389.0 | 71.0m @ 1.50 g/t | |
including 18.1 m grading 2.31 g/t Au from 322.5 m downhole | |||
TDC178_GT | 21.1 | 24.0 | 2.9m @ 1.32 g/t |
33.1 | 36.8 | 3.7m @ 1.02 g/t | |
106.6 | 121.5 | 14.9m @ 1.53 g/t | |
197.2 | 204.3 | 7.1m @ 2.20 g/t | |
TDC182 | 4.0 | 45.9 | 41.9m @ 1.08 g/t |
including 7.0 m grading 2.42 g/t Au from 5.0 m downhole | |||
TDC183_GT | 15.5 | 34.6 | 19.1m @ 1.64 g/t |
including 6.1 m grading 4.88 g/t Au from 21.0 m downhole | |||
63.7 | 86.7 | 23.0m @ 1.49 g/t | |
including 2.5 m grading 4.76 g/t Au from 65.2 m downhole | |||
97.1 | 116.6 | 19.5m @ 0.97 g/t | |
259.6 | 294.2 | 34.6m @ 1.12 g/t | |
TDC185 | 3.4 | 21.5 | 18.2m @ 1.0 g/t |
TDC188_GT | No significant intersection | ||
TDC189 | 272.5 | 280.0 | 7.5m @ 1.93 g/t |
2.4 | 15.0 | 12.6m @ 1.10 g/t | |
including 1.5 m grading 5.68 g/t Au from 3.5 m downhole | |||
TDC190 | 99.0 | 111.5 | 12.5m @ 1.19 g/t |
149.5 | 165.0 | 15.5m @ 0.70 g/t | |
179.7 | 182.5 | 2.8m @ 1.92 g/t | |
194.5 | 249.0 | 54.5m @ 1.38 g/t | |
258.0 | 275.1 | 17.1m @ 0.75 g/t | |
Results may support gains to the current 2 Moz (Indicated) MRE at Tuzon.
TDC177 is close to the southwest extent of the thick lower limb of mineralisation, also referred to as 'zone B' and so the intersection in this hole for this zone (71.0m @ 1.50 g/t Au) confirms the extension of this quality zone. TDC086 is a further 80 m south of TDC177 and was a 2013 hole deepened by 177 m. The new part of the hole intersected 51.2m @ 1.08 g/t from 368.3m downhole confirming the extension of the thick hinge of zone B mineralisation southwards, leaving it open for further expansion. TDC190 is an 'infill hole' but with intersections that are better than the thickness and grades of the previous block model at this position.
The results from these 12 holes, and the other recently reported infill and step-out holes may support gains to the Tuzon MRE based on the 'stacked' and thick intersections including broad zones of >2 g/t Au. Work on the updated MRE for Tuzon by SRK Consulting (UK) Limited commenced and is expected to be reported early October, along with the updated MRE for the nearby Dugbe F deposit.
Opportunities for further expansion of the deposit are apparent: an obvious drill target evident on the southeast 'limb' of the fold south of line 1120N is a continuation of the zone intersected in recently reported[2] TDC186 (17.3 m @ 2.70 g/t), as labelled in figure 1. And the thick hinge zone as intersected by TDC177 (71.0m @ 1.50 g/t from 318m downhole) and TDC086 needs further drilling to follow it southward along strike (figure 2).
Trenching program to test gold in soil trend on strike of Tuzon
The trenching program is nearing completion, 5 of 7 trenches are complete and the first batch of samples is at the laboratory. Trenches are on the 'Tuzon South' and 'Dugbe Shear Zone' targets to follow-up on encouraging 'first-pass' trench results reported in May 2021. These targets are on a 6 km long trend defined by soil anomalism extending southwest on strike from Tuzon. Drilling is planned for Q3/Q4 to test the best trench results.
Figure 1. Cross-section on line 1120 N at Tuzon, showing the TDC177 intersection and further opportunities
To view an enhanced version of this graphic, please visit:
https://orders.newsfilecorp.com/files/6283/95847_e62941eb9430599b_001full.jpg
Figure 2. Long section through the Tuzon deposit showing intersections with >20 gram-metres gold.
*announcement dated 18 May 2021
To view an enhanced version of this graphic, please visit:
https://orders.newsfilecorp.com/files/6283/95847_e62941eb9430599b_002full.jpg
The Tuzon Deposit and Recent Drilling
The deposit footprint is 1.7 km long with an average width of 250 to 300 m, in plan view. Parts of the mineralised layer outcrop for the full length of the deposit. The depth to the base of the mineralised zone ranges from just below surface to over 400 m in the south reflecting the steady plunge of the controlling fold structure. As at the nearby Dugbe F deposit, the host-rock is orthopyroxene gneiss with increased sulphide content (visible pyrrhotite, arsenopyrite and pyrite). At Tuzon the layer has been repeatedly folded and is interpreted to be a large synform which plunges to the southwest at approximately 20 degrees. The mineralised layer is thickened on certain parts of the fold limbs and around the recumbent lower-most fold hinge. The northern limb is referred to as 'zone A' and the southern limb of the fold and the hinge of the synform are referred to as 'zone B'. Zone B is higher grade than zone A with an average of 1.7 g/t gold.
A total of approximately 35,500 m of core drilling was completed by Hummingbird Resources between 2011 and 2014 in support of the current MRE which has an Indicated MRE of 41.9 Mt with an average grade of 1.51 g/t Au and contained gold of 2.03 M ounces. The current Inferred MRE is 10.4 Mt with an average grade of 1.31 g/t Au and contained gold of 0.44 M ounces.
Pasofino added 23 drill-holes at Tuzon between April and July 2021, totaling 6,675 metres of drilling. Of these, six holes were partially for geotechnical purposes and 17 were pure resource drill-holes. Five of the exploration holes involved the deepening of previous (2014 and earlier) drillholes (TDC031, TDC040, TDC078, TDC081, TDC086). The holes were drilled to:
Expand the proximal lateral and strike extent of the mineralisation which they have achieved.
Provide 'infill' intersections to support the mineralisation model.
Identify further upside, which they have.
Provide data and samples for geotechnical inputs into the DFS pit-design.
Drilling procedure and Quality Assurance and Quality Control (QAQC)
The new holes were positioned using a professional surveying instrument, the Trimble R12i Rover unit. Downhole orientation surveys were completed for all holes and core was oriented to assist with interpretation. All drilling and logging was completed in adherence to industry standard operating procedures. Core recovery is over 95% for all mineralized intersections. Core was drilled HQ (65 mm diameter) through the overburden typically 2-10 m depth, then NQ (47 mm diameter) size. Samples were all half core, analyzed by ALS Kumasi in Ghana, a facility compliant to ISO 17025:2005 for the analytical methods used for the samples. Samples range from 1 kg to over 5 kg depending on the length of each sample. Within every 20 core samples submitted a certified standard and blank was inserted. The results of these samples show acceptable levels of variance. Duplicate (other half of the core) samples were inserted 1 in every 20 core samples to check on precision. Sample weights on dispatch and received sample weights were examined to monitor for sample swaps. All samples were stored and transported to the laboratory securely and accompanied by a company representative until arrival at the laboratory. Similar QAQC measures were undertaken for the previous drillholes reported herein; those samples were analyzed by ALS in Loughrea, Ireland which is an ISO 17025:2005 compliant facility for the analytical methods used for the samples. All samples were analyzed by fire assay with atomic absorption finish on a sample with 50g nominal weight.
Figure 3. Map locating the cross-section in figure 1 and drill-holes.
To view an enhanced version of this graphic, please visit:
https://orders.newsfilecorp.com/files/6283/95847_e62941eb9430599b_003full.jpg
Table 2. Collar positions of the new drillholes reported herein. Coordinates are in UTM zone 29N, WGS84 datum.
Hole_ID | East | North | Elevation | Azimuth | Inclination |
TDC031 | 555228.9 | 562665.3 | 117.7 | 295 | -60 |
TDC081 | 555171.0 | 562944.0 | 118.1 | 295 | -60 |
TDC176_GT | 555171.9 | 562943.9 | 118.1 | 115 | -70 |
TDC177 | 555134.3 | 562862.7 | 108.0 | 295 | -70 |
TDC178_GT | 555247.1 | 563063.0 | 108.9 | 70 | -70 |
TDC182 | 555412.7 | 563584.8 | 105.8 | 115 | -60 |
TDC183_GT | 554864.7 | 562508.7 | 117.2 | 310 | -85 |
TDC185 | 555425.2 | 563614.5 | 96.0 | 115 | 60 |
TDC188_GT | 555026.0 | 562494.7 | 110.1 | 140 | -80 |
TDC189 | 555105.9 | 562430.7 | 105.3 | 295 | -60 |
TDC190 | 555327.4 | 563139.3 | 108.3 | 295 | -60 |
Qualified Persons Statement
Scientific or technical information in this disclosure that relates to exploration results was prepared and approved by Mr. Andrew Pedley. Mr. Pedley is a full-time consultant of Pasofino Gold Ltd.'s wholly-owned subsidiary ARX Resources Limited. He is a member in good standing with the South African Council for Natural Scientific Professions (SACNASP) and is as a Qualified Person under National Instrument 43-101.
About the Dugbe Gold Project
The 2,559 km2 Dugbe Project is located in southern Liberia and situated within the south westmost part of the Birimian Supergroup, which is host to the majority of West African gold deposits. To date, two gold deposits have been identified on the Project; Dugbe F and Tuzon. The deposits are located within 4 km of the Dugbe Shear Zone which is thought to have played a role in large scale gold mineralization in the area. A large amount of exploration in the area was conducted by Hummingbird, including 74,497 m of diamond coring. 70,700 m of this was at the Dugbe F and Tuzon deposits, discovered by Hummingbird in 2009 and 2011 respectively. Both deposits outcrop at surface and may be amenable to open-cut mining. In addition, there are a number of prospects within the Project, including 'Sackor' where gold mineralization has been intersected in drill-holes and where additional drilling is planned. No other prospects have been drill-tested to date. At some prospects extensive trenching identified anomalous levels of gold that require drill-testing. An aggressive exploration program to test the prospects is planned by the Company. In 2019, Hummingbird signed a 25-year Mineral Development Agreement ("MDA") with the Government of Liberia providing the necessary long-term framework and stabilization of taxes and duties. Under the terms of the MDA, the royalty rate on gold production is 3%, the income tax rate payable is 25% (with credit given for historic exploration expenditures), the fuel duty is reduced by 50%, and the Government of Liberia is granted a free carried interest of 10% in the Project. Over $70 million has been spent by Hummingbird on the Project.
Table 3. Mineral Resource Estimate for the Dugbe Gold Project using a 0.5 g/t Au cut-off grade
Category | Tonnes (million) | Au Grade (g/t) | Contained Gold (000 ounces) |
Tuzon Deposit | |||
Indicated | 41.9 | 1.51 | 2,032 |
Inferred | 10.4 | 1.31 | 439 |
Dugbe F Deposit | |||
Indicated | 5.8 | 1.46 | 273 |
Inferred | 16.3 | 1.57 | 823 |
Totals | |||
TOTAL INDICATED | 47.7 | 1.51 | 2,304 |
TOTAL INFERRED | 26.7 | 1.47 | 1,262 |
Rounding errors may be evident when combining totals in the table but are immaterial.
The effective date of the Mineral Resource Estimate is August 19, 2020 as reported in "Dugbe Gold Project, Liberia NI 43-101 Technical Report, Effective Date 19 August 2020," a report prepared by SRK Consulting (UK) Limited.
The Qualified Person is Mr. Martin Pittuck (CEng, MIMMM).
The Mineral Resource has been classified under the guidelines of the Canadian Institute of Mining, Metallurgy and Petroleum (CIM) Standards on Mineral Resources and Reserves, Definitions and Guidelines prepared by the CIM Standing Committee on Reserve Definitions and adopted by CIM Council (2014), and procedures for classifying the reported Mineral Resources were undertaken within the context of the Canadian Securities Administrators National Instrument 43-101 (NI 43-101).
The estimates are stated using a 0.5 g/t Au cut-off grade.
Mineral Resources are not Mineral Reserves and have no demonstrated economic viability. The estimate of Mineral Resources may be materially affected by environmental, permitting, legal, marketing, or other relevant issues.
Mineral Resource estimates are stated within conceptual pit shells that have been used to define Reasonable Prospects for Eventual Economic Extraction (RPEEE). The pit shells used the following main parameters: (i) Au price of US$1700/ounce; (ii) plant recovery of 90%; and (iii) mean specific gravity of 2.78 t/m3for fresh rock and 1.56 t/m3for oxide material for Tuzon, and for Dugbe F a mean specific gravity of 2.73t/m3.
Figure 4. Dugbe Gold Project Mineral Development Area.
To view an enhanced version of this graphic, please visit:
https://orders.newsfilecorp.com/files/6283/95847_e62941eb9430599b_004full.jpg
About Pasofino Gold Ltd.
Pasofino Gold Ltd. is a Canadian-based mineral exploration company listed on the TSX-V (VEIN). Pasofino, through its wholly-owned subsidiary, has an option to earn a 49% economic interest (prior to the issuance of the Government of Liberia's 10% carried interest) in the Dugbe Gold Project.
For further information, please visit www.pasofinogold.com or contact:
Ian Stalker, President & CEO
T: 604 367 8110
E: istalker@pasofinogold.com
Cautionary Statements Regarding Forward-Looking Statements
This news release contains "forward-looking statements" that are based on expectations, estimates, projections and interpretations as at the date of this news release. Forward-looking statements are frequently characterized by words such as "aim", "plan", "expect", "project", "seek", "intend", "believe", "anticipate", "estimate", "suggest", "indicate" and other similar words or statements that certain events or conditions "may" or "will" occur, and include, without limitation, statements regarding the ability to raise the funds to finance its ongoing business activities including the acquisition of mineral projects and the exploration and development of its projects. Such forward looking statements involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements of the Company to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. Such risks and other factors may include, but are not limited to, the ability to successfully file and obtain approval for the Qualifying Prospectus, the ability to obtain all requisite regulatory approvals in respect of the Qualifying Prospectus, the results of exploration activities; the ability of the Company to complete further exploration activities; timing and availability of external financing on acceptable terms and those risk factors outlined in the Company's Management Discussion and Analysis as filed on SEDAR. The Company does not undertake to update any forward-looking information except in accordance with applicable securities laws.
[1] Announcement dated 18 May 2021
[2] Announcement dated 18 August 2021
To view the source version of this press release, please visit https://www.newsfilecorp.com/release/95847
